Showing posts with label mineral spirits. Show all posts
Showing posts with label mineral spirits. Show all posts

Sunday, November 4, 2012

Varnish Work Continues

I did a little bit of varnish work today on all the handrails today. On the handrail that I used a teak cleaner on came out nice. This first picture is after one coat of varnish.
 


On the other pieces that I already had a coat of varnish, I sanded them down a bit to smooth out the finish.


I then varnished the other pieces too. This picture below, I have one of the piece I had varnished before with the one I used a teak cleaner on. The one I used the cleaner on, did come out a little brighter then the one behind it. They still look pretty nice with fresh varnish. I think altogether, I have 2-3 coats on. The next couple coats will have less mineral spirits and more varnish as I work towards straight varnish for the finishing coats.


Saturday, August 25, 2012

Handrail Removal

I decided to do a video this time showing my removal of the handrails.


One of the bolts I could not wedge the nut to loosen and I stripped the head trying to get it out. Now, it looks like I'm going to have to resort to drilling out the bolt or get a small fine tooth saw blade and cut the head off so I can remove the rail.

The rails I did get off are now at the house so I can refinish and prepare them for reattaching to the deck. So far, things seem to be going well. Just need to get that one bolt out so I can get to work on the other handrail.

Considering the bolts are phillips head, I'm now considering the possibility of changing them to a hex head. I wonder if that might make it easier for removal in the future, if it was needed. Either way, as long as things get bedded down good in the first place, it should be good as it is. If I'm going to drill out or cut the one bolt off, I'll need to find a replacement anyway for that one.

Saturday, August 18, 2012

Teak handrail work

For the first time in a long time, I have a birthday on a day that I'm NOT working (as in, paid employment). Yep, today I'm 34.

It was a nice day today, and being a weekend, I decided to go do some work on the boat.

I've been looking at the teak handrails for a while and doing a little work to rebed them to prevent additional damage to the interior. I guess you could say that today I had a crazy moment and decided to ruin the nice handrails down below, gut out the plugs and unscrew everything so I could get to the bolts holding down the handrails on the top.

Here is the nicely finished plug down below.


And here's how it looked after I took one of them out.


Everything was going pretty well. Still, it wasn't easy. My hand are hurting from trying to chisle everything out with screw drivers without causing too much damage during the removal.

One of the plugs on top had to be removed in order to stop a nut from spinning with the bolt.


I ended up having to use a painters spatula to wedge it to keep it from moving. At the same time, I was reaching in from below through a port hole to unscrew it.


Here's the handrail sitting in the cockpit.


It'll take some cleaning up to do before I put the handrails back on. These, I can bring back to the house to pull the old varnish off without having to go out to the storage place to work on it at the boat..


Unfortunately, The handrail on the other side was not as cooperative. There were three small handrails down below that I had to chisle out the plugs to get to the screws. Even then, When I worked on the bolts to detach everything, I have one that is spinning freely like the one I mentioned above and three of them are pretty tight and don't want to move and will require a bit more work to get it off. Since I wasn't feeling up to staying at the boat any longer, I thought it best to try again another time, probably next week. All together, I probably spent about 5 hours on all this today. It is not easy work cleaning the plugs out of the handrails.

Another reason I decided to do all this is so I can rebed everything rather than focusing on just where I see damage. This seems to be the first time they will be rebedded in 30 years or so. Then, I have to decide, do I use Butyl tape or Lifecaulk to rebed everything, as this is what I have on hand. Or, as others on the Nor'sea owners group seem to love, Dolphinite, which I also have on hand. I'm not sure of Dolphinite as it seems to have a more fluid consistancy that I expected. I first thought it would be similar to the butyl putty feel to it.

Time to consult the group. Thanks for visiting.

Friday, July 6, 2012

First Varnish

It's been a while since I visited Rhapsody. Today I decided to check in on the boat. Things looked good. I took the piece of the handrail that I removed from the top side and decided to do something with it. I first did a little sanding but not much. I was looking in a book that after any sanding was done, it could be wiped down with mineral spirits and could be ready for varnish.

Here I wiped it down and could see some of the grain showing through. Nice hint of what it would look like with varnish.



I put a couple screws into the handrail to prop it up with wrenches while it dried.


I went ahead and applied a little bit of varnish, mixed 50/50 with mineral spirits.





This is the Epifanes varnish I used.


Before I left the boat today, I moved the handrail to the countertop down below. The Epifanes can says to allow to dry 24hrs between coats. I tried coating with a couple coats before I left. Hopefully it will turn out nice and I can add additional coats whenever I visit again.