Showing posts with label sea cock. Show all posts
Showing posts with label sea cock. Show all posts

Saturday, May 11, 2013

Project Touchups

Today was a busy day. The weather was nice and cool since some rain came through the last couple days. It's been mostly cloudy today but the sun is finally showing up in the afternoon.

I started off the day working on installing a new water strainer. I bought a Groco ARG-500 from Hopkins-Carter and it got here pretty quickly. I ordered fittings for it from another source and waiting for those to come in a couple days. Then at that time, I'll add the fittings and get some hose to go with it. I had to take off the little one that was already there. I cut the hose going to the water pump, then unscrewed the bracket behind the strainer.


Up close, you can see that someone used to be able to see through this.


Here's a size comparison between the old and new strainers.


First attempt at mounting the filter, It looked like it might interfere with part of the engine...


...so I moved it down a little in hopes it will be clear of any engine shaking/vibration.


And the mount itself.


After installing the strainer, I used a dremel to grind out the threads from the epoxy when I installed the base for the new seacock. I wanted to get the thru-hull to go through and thread only into the flange base. I didn't get any pictures of this process. Since there was a lot of dust associated with this, I used the shop-vac at the same time which really helped to keep things cleaned up.

I used the little shop-vac to do some general cleanup around the boat. I also vacuumed some loose debris in the head. I vacuumed up the storage spaces around the salon/seating area. I decided to show just how much storage space there is in the Nor'sea. The white card I placed is the size of a credit card, so you can get an idea of the space available. The same space is available on both sides.




When I cleaned up to the forward storage locker, I took the sails out and decided to take the rope and chain out of it too. I only measured the chain and I planed on measuring the rope too but didn't do it just yet.


I lowered the anchor to the ground so I could stretch it out for measurement. It turns out that there is 140' of chain in this pile.


I went to a hardware store and bought some bright orange and yellow spray paint. While there are marks on the chain, I wanted to put new ones on that were a little brighter. I put the orange marks at 25', 75', 125' and yellow marks at 50' 100'


I installed the chain back on the boat once the paint dried. I didn't see any attachment points for the chain or rope and looking at installing something to keep the anchor from getting away from me.

When I look around online and see forum posts where people are looking for a boat with a lot of space because of their height, I think that you can't have everything. I'm 6'5" and I can not stand up straight while down below but I can still fit comfortably when I'm laying in a quarterberth or when the salon is converted to sleeping space. I don't feel at all cramped in my boat. I've now been in every part of my boat and don't really have any problem reaching into any part of it. Now to show that I've been IN every part of my boat, here I am sitting in the sail/anchor locker. :-)

Sunday, April 7, 2013

Raw Water Seacock, Installed!

Instead of going through several posts for each step along the way, I decided to make a post for the project as a whole. After seeing a loose thru-hull, I went ahead and worked on getting it replaced. Certainly don't want to sink the boat as soon as it gets in the water.

Thursday, November 15, 2012

Winterize Attempt

This is my first winter since I bought the boat. I was reading different things online thinking I should probably do something about it. I found some safe RV antifreeze used for waterlines. As far as I can tell, the main water lines on the boat are dry. I don't know when the last time water was put in the tanks. I thought I would go to Rhapsody to at least winterize the engine.

I did this last night. I went to take off the hose from the raw water seacock by first releasing the two hose clamps holding it. The hose wouldn't budge. I grabbed the hose to wiggle it off, then realized, the whole seacock was moving. I moved it back and forth and also twisting it as I looked at it. I then thought to myself that it needed to be replaced. The seacock, as all of them on this boat, are mounted on what looks like a 1/2" piece of wood. The wood on most of the seacocks, that I've seen, look to be in fairly good shape. This one, the raw water seacock, the wood is soft and falling apart a bit.

Now, I'm researching parts, procedures and price on new assembly's. Since I know I have to get this one replaced, I may end up replacing others.

I looked at this page that was sent to me, http://www.pbase.com/mainecruising/seacock_primer and this one, http://www.pbase.com/mainecruising/replacing_thruhulls on the same site about replacing them.

In the first link, it shows the "preferred and non-preffered" installations. The triangular one being preferred... all of mine looks like the other one. I'm looking for parts between Jamestown Distributors, Defender, and West Marine to get the better price. For the most part, they carry the same items. I'm also looking at using fiberglass board to use as a backing material instead of wood again and getting a Groco flanged seacock. Plenty more research needed.

I wasn't expecting to work on seacocks any time soon. I was hoping to get the boat in the water soon and do some sailing before doing any major items. Since the raw water seacock looks bad enough to cause the boat to sink, it has moved to the top of list of things to do.

It was suggested to me that the water lift muffler (metal can behind the engine) needs to be replaced. Looking at pictures I've had before, I could see that there were signs of leaking in the past. It was suggested to me that I replace the metal can with a fiberglass one as it should last longer. I'm sure I'll uncover other things to fix or replace soon. I just hope I can get them done to get it in the water and enjoy the sailing part of owning a boat too. :-)

Replacing all the seacocks will turn out to be an expensive project but as long as it's done right, it'll last a very long time.

Here's a short video showing the movement of the seacock.

 
Update 17 Nov 2012,
 
I was researching different things to replace the raw water valve/seacock for the engine intake. I'm starting to consider going with a regular round through-hull and flanged seacock. This post I found on a forum makes a good point of growth getting under an external strainer and the difficulty that comes to trying to clean and clear it.
 
This is the space showing where the strainer was removed.
 
 
Update 25 Nov 2012
 
For Thanksgiving day, I looked over the engine and got it running and was able to get the antifreeze through the engine's water system. This short video shows how it was setup.