This post I should have done at least a few weeks ago. Got distracted because of work being crazy busy lately.
The last time I did any painting on the boat, it had warmed up a little that day from the previous week. Not bad, right?
Well, warmer weather brought on some (ok, a LOT) of flying things. I thought the last coat of paint was going on pretty good but the downside of it was a bunch of gnats flying around. It seemed like they were attracted to the paint. That figures!
Not only were they trying to fly into the cup the paint was in, but they were flying into the paint on the boat too while it was still wet. Frustrating, to say the least. I figured I could get them off by washing the areas and/or when I sand for the next coat. Either way, they're done for.
Can you spot them in this picture? all the little black spots on the paint, those are gnats.
I went down the starboard side, got gnats. Went down the port side, then a new surprise.
I was painting with a plastic cup. You know, the one's you use for picnics. Well, by the time I was finishing up on the port side, I look into the cup and saw there wasn't as much paint as only a moment earlier. Turns out that the paint (or maybe it was the thinner) had eaten through the plastic.
The paint didn't just leak out the cup, it got all over the ladder, the ground, part of the trailer and down a pant leg and part of my shoe and on the BOAT. I was wearing gloves so I didn't feel it running down my hand.
With the streaks on my pants, I was thinking it looked like I had a nose bleed. So, a good pair of pants are now work-pants, for boat work and yard work, etc.
During the same visit, I took out the Garmin 546s to sell as I intend to upgrade someday to a larger-screened and more "proper" chartplotter. The latest from Garmin, like the 741xs is looking nice. I'd like to install a new radar and have it all integrated. So now the swing arm is empty of electronics for now. But all that will come later in the refit.
Some good news, due to good timing. I've been looking at battery chargers to replace the 10 Amp charger I had before. There were a couple of them that I was considering. While looking at Cruisers Forum in the classified ads, someone had just listed a ProNautic 1230P charger. Apparently, the guy who listed it bought it then changed his mind for what he wanted to do. So, I nabbed it up quickly as it was at a discount from the list price shown on Defender's website.
It's bigger than I expected it would be so now trying to figure out how/where to mount it, then may have to make new wire runs to hook it all up.
Showing posts with label Pettit. Show all posts
Showing posts with label Pettit. Show all posts
Sunday, November 23, 2014
Saturday, September 27, 2014
Some Bling
Bunch of projects to report here. This has been on going since my last post.
I stripped down the old varnish on the rudder cheeks. The finish that was used before was worn and the wood itself is cracking but overall, not so bad that they need replaced. These are large pieces of wood, I think mahogany that's 3/4" thick. Taking the old varnish off, they showed some nice looking wood underneath. They soaked up some thinned Epifanes varnish when I mixed 50% mineral spirits so they'll take quite a few coats to really start looking good.
I stripped down the old varnish on the rudder cheeks. The finish that was used before was worn and the wood itself is cracking but overall, not so bad that they need replaced. These are large pieces of wood, I think mahogany that's 3/4" thick. Taking the old varnish off, they showed some nice looking wood underneath. They soaked up some thinned Epifanes varnish when I mixed 50% mineral spirits so they'll take quite a few coats to really start looking good.
![]() |
| Sanded down |
![]() |
| First coat of varnish, thinned 50% |
![]() |
| First coat on one side of chainplate spacers |
I was chatting with others online about my chainplate replacement and there was a mention of Collinite Metal Wax as being a good metal polish. I took them up on that suggestion. I don't have a bench grinder with a buffing pad as another Nor'sea owner, Greg, did so I wanted to find an alternative. I found at Lowes hardware store an attachment for the drill that accepts sockets. This allowed me to spin the bolts quickly that got them to polish up really nice.
Here's a video showing how the bolts were getting polished.
New chainplates made of 316 stainless arrived. They are nicely polished. Looking forward to getting them on the boat once the paint work is finished. These together with the polished bolts will look pretty sharp on the boat.
Aside from replacing the chainplates, the other big project I'm doing while the old one's are off is to repaint the blue stripe by the toe rail a different color. On a couple nice days, 13 and 14 Sep, I painted some primer to get it ready for the top coat. I put a coat of primer on and came back the next day to sand smooth and paint a second coat. The second day was sunny and it was drying pretty quickly. Next, will be having to sand the second coat smooth and put on the top coat of Burgundy Pettit EasyPoxy.
![]() |
| First coat of burgundy |
27 Sep, I sanded down the first coat of burgundy on the port side. I sanded the primer on the starboard side and painted the first coat of burgundy. I've thinned the paint pretty good but still getting brush marks. It's likely to be because it's been warm out and very windy. I may try adding a little more thinner but not sure how that would work. I'm expecting to paint several coats to at least get an even color.
![]() |
| Sanded first coat |
![]() |
| Second coat on port side |
A lot of work has been done but still much more to do. I've been working once a week in the weekend. Not enough but I'll take what I can. All this work will get the boat looking better than it has in a very long time. This boat will be ready for another 30+ years soon enough.
Labels:
Chainplates,
Collinite Wax,
Epifanes,
Mahogany,
Nor'sea,
Pettit,
varnish
Monday, August 18, 2014
Check Your Chainplates
I've heard it before by others for everyone's awareness to check chainplates. Other owners of a Nor'sea 27 have changed out their chainplates on 30+ year old boats because they saw cracks or ended up finding out there were cracks in them during removal. Like the old saying goes, nothing lasts forever and these chainplates are no exception. One owner took his chainplates off and while making the video, one broke in his hand.
While removing my chainplates, I noticed. some pitting and surface rust. They didn't really look TOO bad to me and still felt pretty solid. Then, I was down to two. The bow and the aft chainplate on the port side. The bow took a little time as it was flush with the surface and didn't want to lift up at first. The last chainplate on the side was another story. Each plate for the shrouds have a little block of wood for spacer. The bolts going through them stayed solid in place until I banged them out, but prying the plates from the boat was difficult because the bolts didn't budge. When I went to pull the last chainplate, it gave a little.
I thought it was odd since all the others were pretty sturdy but now I got one with a soft spot. Turns out, there was a hidden crack in it. It was hard to see at first but once I removed the spacer block, I pulled on the plate to exaggerate the bend to show the crack easier. It went right to the bottom of a bolt hole. It ended up leaving one bolt holding the half-shroud that was attached to it.
![]() |
| Can you see the crack? |
![]() |
| How about now? |
![]() |
| Pulled it to have it show up more |
![]() |
| You can see the crack here with one bolt before the shroud attachment |
![]() |
| Broke to show how much metal (on the left) was actually holding it together. |
Here I am, sitting inside the sail locker removing the nuts holding the bow chainplate in place. Just shows that a guy my size (6'5") can fit anywhere in my boat (mostly).
While I didn't take pictures of the chainplate areas after I cleaned them up and sanded, I can say their areas are looking much better, at least on the port side. I've started doing some sanding on the port side. I used 400, 600 and 800 all dry. Then, I read something that the sanding should be done wet so when I went to 1500, I used a spray bottle to wet the areas and sanded some more. It's looking much better so I hope this whole process is worth the effort.
I also have a compound that I found. It's made by Meguiar's and it's listed as a one-step compound. I also got a paste wax, Collinite Heavy Duty Paste Fleetwax that I'm hoping to bring the hull to a nice shine.
Here's how it looks after some compound. It'll need some more work but it's getting there. It probably hasn't been done in many years so anything is an improvement at this point. This is the first time I've done it since buying the boat a little more than 2 yrs ago.
Another project I'm looking at doing while the chainplates are off the boat is to repaint the blue stripe up by the toe rail. My favorite color is dark red. So, I looked around at topside paint and decided to get one in the color I want. It's Burgundy by Pettit Easypoxy. I'm thinking of re-painting the waterline too but not sure now if it's the right paint for it. Maybe someone reading this could advise me on this. The waterline will wait for now so no hurry. The top stripe is needed sooner before I get new chainplates in place.
Here's a quick snapshot of the color I bought. So more sanding, prep work and priming, etc.
![]() |
| Doesn't that look nice? :-) |
Plenty to do on this old girl but it'll be worth it in the end.
Subscribe to:
Posts (Atom)






























